How do the plants used in phytoremediation in constructed wetlands,a sustainable remediation strategy,perform in heavy‐metal‐contaminated mine sites?

This review draws on knowledge for the treatment of heavy‐metal leachate in contaminated mine sites. Mine waste rock dumps and tailings generate a continuous stream of metalliferous and saline leachate over the long term. The mining industry has many legacy sites, which have compromised aquatic ecosystems and groundwater because of heavy‐metal contamination. Chemical and engineering methods are available and have been extensively utilised. However, these methods require intensive energy and often produce substantial volumes of secondary waste. We therefore argue in favour of phytoremediation as a sustainable remediation strategy leading towards efficient and sustainable metal removal and immobilisation through constructed wetlands.     

On the issue of urea phase connectivity in formulations based on molded flexible polyurethane foams

Lithium chloride was added to systematically alter the phase separation behavior, and hence, the nature of urea phase connectivity, in a series of plaques based on molded flexible polyurethane foam formulations. The plaques prepared were found to possess varied levels of urea phase connectivity that was examined at different length scales using several characterization techniques. SAXS, TEM, and t‐AFM were used to show that addition of LiCl systematically reduced the formation of the urea aggregate structures typically observed in flexible polyurethane foam formulations and thus led to a loss in urea phase connectivity at the macrolevel. SAXS, DSC, and DMA revealed that formulations with and without LiCl exhibited similar interdomain spacings and soft segment glass transitions, suggesting that incorporation of LiCl did not prevent the plaques from undergoing partial microphase separation. WAXS demonstrated that addition of LiCl led to a loss in the local ordering of the hard segments within the microdomains, i.e., it led to a reduction of microlevel connectivity or the regularity in segmental packing of the urea phase. High‐magnification t‐AFM images showed that increasing the LiCl content dispersed the urea component more homogeneously and in a more uniform manner in the polyol matrix, and thus altered the connectivity of the urea phase at the microdomain level. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2956–2967, 2002     

Corrosion of 2205 duplex stainless steel in chloride medium containing sulfate-reducing bacteria

Sulfate-reducing bacteria (SRB) play significant role in the corrosion of stainless steels exposed to marine and soil environment. Sulfate reduction by bacterial species results in the production of H₂S, which can significantly influence the anodic and cathodic processes and ultimately enhances the corrosion of materials. In the present study, 2205 type duplex stainless steel (DSS) coupons in solution-annealed condition were exposed to chloride medium containing SRB species, Desulfovibrio desulfuricans, for 40 days and examined by microscopy. Etching of the duplex structure, pitting as well as crevice attack were noticed. Similar results were obtained by microscopic studies with coupons exposed for 14 days in medium containing SRB followed by anodic polarization. SEM studies, of crevices observed after anodic polarization, indicated that the attack was initiated at the grain boundaries and slowly encroached into austenite grains. The initiation of attack was also evident from AFM studies of coupon exposed under freely corroding conditions for 7 days. ESCA studies reveal that under anaerobic conditions of SRB growth sulfidation of passive film occurs. The modified passive film found to depolarize the cathodic reactions. The nature and mechanism of SRB attack on DSS and possibility of detection at early stages were discussed.     

An SDP Primal-Dual Algorithm for Approximating the Lovász-Theta Function

The Lovász ?-function (Lovász in IEEE Trans. Inf. Theory, 25:1–7, 1979) of a graph G=(V,E) can be defined as the maximum of the sum of the entries of a positive semidefinite matrix X, whose trace Tr(X) equals 1, and X _ij =0 whenever {i,j}∈E. This function appears as a subroutine for many algorithms for graph problems such as maximum independent set and maximum clique. We apply Arora and Kale’s primal-dual method for SDP to design an algorithm to approximate the ?-function within an additive error of δ>0, which runs in time $O(\frac{\vartheta ^{2} n^{2}}{\delta^{2}} \log n \cdot M_{e})$ , where ?=?(G) and M _e =O(n ³) is the time for a matrix exponentiation operation. It follows that for perfect graphs G, our primal-dual method computes ?(G) exactly in time O(? ² n ⁵logn). Moreover, our techniques generalize to the weighted Lovász ?-function, and both the maximum independent set weight and the maximum clique weight for vertex weighted perfect graphs can be approximated within a factor of (1+?) in time O(? ^?2 n ⁵logn).     

Orthogonal and fine lithographic structures attained from the next generation proton beam writing facility

A second generation proton beam writing (PBW) system has been built at the Centre for Ion Beam Applications at the National University of Singapore for fabrication of high aspect ratio 3D nano lithographic structures. System improvements and a few lithographic structures obtained with this facility are presented in this paper. Through accurate alignment of the magnetic quadrupole lenses and the electrostatic scanning system, orthogonal beam scanning has been achieved. The earlier constrain of limited beam scan area has been overcome by adopting a combination of beam and stage scanning as well as stitching. With these improvements smallest ever Ni structure of 65 nm in width has been fabricated using nickel electroplating on a proton beam written PMMA sample in the second generation PBW facility. Using this improved PBW facility, we have also demonstrated the fabrication of fine lithographic patterns with 19 nm line width and 60 nm spacing in 100 nm thick negative high resolution hydrogen silsesquioxane resist. Future possible system improvements leading to finer resolution will be discussed briefly.     

Supported binary oxide monolayers as selective oxidation catalysts: Bi2Mo3O12/TiO2

Monolayers of bismuth molybdates supported on low-area TiO₂ (anatase) catalyse the oxidation/isomerisation of 1-butene to butadiene and 2-butenes with combined selectivities of 80–100% and show significantly lower specific rates of deep oxidation than does -Bi₂Mo₃O₁₂. As loadings are increased above 2 wt% (equivalent to one monolayer), selectivities remain high and, although the butadiene yields are generally only moderate, in some cases they exceed that shown by the unsupported -phase. This revised version was published online in July 2006 with corrections to the Cover Date.     

A new equation of state to predict S-CO<Subscript>2</Subscript> flow with real gas effects

The accuracy of the thermodynamic properties prediction from the different Equation of state (EOS) varies upon the range of temperature and pressure. Despite the variety of EOS available, there is no de facto for selecting an EOS for particular computational modeling. The EOS model recently developed by Kumar and Kim (K-K EOS) determines more accurately the thermodynamic properties of CO₂ than earlier models. In this present study, K-K EOS is successfully implemented in the computational analysis of compressible supercritical CO₂ flow (S-CO₂) in the thermodynamic region near and away from the vapour-liquid critical point. Computational results of SCO₂ flow with the real gas properties predicted with the K-K EOS is compared with Span and Wagner (SW EOS) and ideal EOS.     

Impact of frozen storage on polyacetylene content, texture and colour in carrots disks

This study investigated the effect of freezing method (slow or blast freezing) with or without blanching during storage at −20 °C on the levels of three polyacetylenes, falcarinol (FaOH), falcarindiol (FaDOH), falcarindiol-3-acetate (FaDOAc) in carrot disks. The quality of the carrot disks was also assessed using instrumental texture and colour measurements. Blast frozen carrot disks retained higher amounts of polyacetylenes compared to their slow frozen counterparts. Whilst the levels of retention of total polyacetylenes was higher in unblanched than blanched disks prior to freezing there was a sharp decrease in the levels of polyacetylenes in unblanched frozen carrots during the storage period for 60 days at −20 °C. FaDOH was observed to be the most susceptible to degradation during frozen storage of unblanched carrot disks, followed by FaOH and FaDOAc. The changes in the level of polyacetylenes during storage were adequately described by using Weibull model. The texture and colour were also found to decrease during frozen storage compared to fresh carrots.     

Stress Corrosion Cracking Study of Aluminum Alloys Using Electrochemical Noise Analysis

Stress corrosion cracking studies of aluminum alloys AA2219, AA8090, and AA5456 in heat-treated and non heat-treated condition were carried out using electrochemical noise technique with various applied stresses. Electrochemical noise time series data (corrosion potential vs. time) was obtained for the stressed tensile specimens in 3.5% NaCl aqueous solution at room temperature (27 °C). The values of drop in corrosion potential, total corrosion potential, mean corrosion potential, and hydrogen overpotential were evaluated from corrosion potential versus time series data. The electrochemical noise time series data was further analyzed with rescaled range (R/S) analysis proposed by Hurst to obtain the Hurst exponent. According to the results, higher values of the Hurst exponents with increased applied stresses showed more susceptibility to stress corrosion cracking as confirmed in case of alloy AA 2219 and AA8090.